Bending machine moulds are divided into upper and lower moulds of the bending machine, which are used for sheet metal stamping forming and separating molds. The mould used for forming has a cavity, and the mould used for separation has a cutting edge.
Generally use T8 or T10, T10A, and the better 42CrMo material, it mainly requires high strength, high toughness and good wear resistance. Cold work die steel is used. Cr12MoV is a good material.The performance can be used. Satisfied, the process performance is good, the price will be higher. 42CrMo is a high-strength alloy quenched and tempered steel with high strength and good toughness. It can work below 500 degrees.
Chart of Standard Mold | ||
Common bending machine number | Dimensions of upper mold (mm) | Dimensions of the lower mold (mm) |
40T/2000 | 2000×70×18 | 2000×55×55 |
40T/2000 | 2000×80×18 | 2000×75×75 |
40T/2000 | 2000×90×30 | 2000×55×55 |
40T/2000 | 2000×150×26 | 2000×55×50 |
63T/2500 | 2000×85×28 | 2500×70×70 |
63T/2500 | 2500×150×25 | 2500×65×65 |
63T/2500 | 2500×85×28 | 2500×55×55 |
63T/2500 | 2500×100×20.5 | 2500×70×7 |
80T/3200 | 3200×80×18 | 3200×95×95 |
100T/3200 | 3200×150×26 | 3200×95×95 |
100T/3200 | 3250×86×28 | 3250×75×7 |
100T/3200 | 3200×72×30 | 3200×100×100 |
100T/3200 | 3250×80×25 | 3250×95×95 |
100T/3200 | 3200×85×25 | 3200×75×75 |
100T/3200 | 3200×80×25 | 3200×95×95 |
160T/3200 | 3200×90×56 | 3200×110×110 |
160T/3200 | 4000×80×25 | 4000×110×11 |
160T/3200 | 4000×90×30 | 4000×110×11 |
160T/3200 | 4000×134×34 | 4000×120×120 |
Adding to cart succeed!
items in cart.
Subtotal:
Requires a minimum purchase of . And you still need to meet the requirements.
Proceed to Checkout Return to Shopping